産品品牌：
産品型號：
characteristic:
1. All liquid silica gel products can be produced and processed with different types of equipment of Jiechen, and different colors can be added according to user requirements;
2. The equipment is equipped with modern SPS control system, and the machine can be operated easily through several switches and buttons;
3. The switch contact can avoid material shortage and overpressure or low pressure;
4. Pigments and additives are mixed in the mixing module of the feeder, which results in the shortest flushing path, which also reduces the material loss.
5. The use of direct feed, so that air can not enter the pipe, no exhaust, greatly reduce the waste of raw materials and labor, can effectively eliminate the problem of AB ratio caused by raw material barrel deformation, unique design to ensure a stable feed ratio of 1:1.
Applicable production scope:
1. All the liquid silica gel injection molding machines are equipped to complete the A and B rubber pumping and feeding operations.
2. Electronic products, auto parts, medical supplies, adult products, maternal and infant products, kitchen and bath supplies, diving supplies, etc.
Technical parameters of liquid silica gel feeder
| 項目/PROJECT | 單位/UNIT | 蓡數/PARAMETER |
| 送料壓力 | Mpa | 0-20 |
| Feed pressure | ||
| 輸齣量 | g/min | 3500 |
| Output quantity | ||
| 供料係統 | L | 20/200 |
| Feeding system | ||
| 功率要求 | V/HZ KW | 380/50 2.2 |
| Power requirement | ||
| 混郃比例 | A:B | 1:1 |
| Mixing ratio | ||
| 比例精度 | AB | ±1% |
| Ratio accuracy | ||
| 空氣壓力 | kgf/cm2 | 6 |
| Air pressure | ||
| 輸配筦 | M | Φ3/4*2.7 |
| Transmission and distrbution | ||
| 理論機重 | T | 960 |
| Machine weight | ||
| 機器尺寸 長*寬*高 | M | 1.3*1.05*2.3/3.1 |
| The machine size L*W*H |
